Great Northern 6208 Use and Care Manual download pdf (Page 6)

check the electrical specifications! This is a commercial quality popper requiring 120V

OPERATING PROCEDURES

1. Place the corn popper on a dry, level surface. Protect from rain and other weather elements. Do

not install near pool or water. Plug the unit into a suitable grounded electrical outlet. (Please

Be sure that your power source matches the rating label specified next to the power cord.)

2. The Main unit has 3 function switches: Stirrer, Pop (which controls the Pot Heater) and Light.

3. Check to see that the kettle power cord is securely attached and that the stirrer arm is securely

seated in its housing inside at the top of the cabinet .

4. Turn the Light switch (III) to ON. Turn the Pop switch (II) to ON and add a suitable amount of

butter or oil (Fig. 1). While the amount is dependent upon your taste, please do not exceed 1/2 -

3/4 oz. for a full 16oz. batch of popcorn.

5. Preheat kettle for 3 to 4 minutes with oil added (until steam comes out from the pot). If using a

Great Northern Popcorn Co. Gourmet Tri-Pak, cut off top of oil section on pouch and squeeze oil

into pot.

Please Note: DO NOT USE LIQUID SUGAR OR HONEY AS THIS MAY DAMAGE KETTLE

AND CAUSE SMOKING AND/OR INJURY FROM HOT SUGAR. KEEP WATER FROM

KETTLE, OIL AND MACHINE. AVOID SPILLING OIL ON OR AROUND THE MACHINE AS

THIS MAY CAUSE A POTENTIAL FIRE.

Please Note: If you are using your popper for the first time, clean the interior of the glass surfaces

and wipe the inside of your popper with a clean damp sponge before heat is applied. Please follow

these procedures for the best operating results and long machine life.

Stir (I)

Pop (II)

Light (III)

1 2 3 4 5 6 7 8

No comments

Great Northern 6208 Use and Care Manual Page 6