Great Northern 6301 Use and Care Manual download pdf (Page 7)

ASSEMBLY PROCEDURES

Please consult the Electrical Specifications section on page 5 of this manual before operating.

Unpacking Your Machine

1. Open the shipping cardboard box and

remove the foam packers in each corner

(Figure A).

2. The cotton candy pan is packed upside

down over the motor assembly (Figure B).

Remove the pan and set aside.

3. The spinning head and motor assembly is

packed directly beneath the inverted pan

and protected by foam (Figure C). Remove

the foam and locate the cart assembly

instructions, scoop and replacement motor

belts packet (Figure D) and set aside.

4. Carefully remove the head and motor

assembly. Do not tilt or lean the body of the

machine more than 45 degrees (Figure E).

Test the drawer (Figure F) to ensure that it

slides freely.

5. Open and confirm the contents of the

packet (Figure G). The plastic packet

should contain instructions for cart

assembly, a floss scoop and (2)

complimentary motor belt replacements.

6. Inspect your machine for any loose parts

or screws. Check to make sure that the

rubber feet are securely fastened (Figure I)

and inspect the

power cord and plug

(Figure H). If the plug

or cord are

damaged, DO NOT

ATTEMPT TO START

MACHINE. Instead,

call support or

(See page 5 for

contact details).

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Great Northern 6301 Use and Care Manual Page 7